Home > IEC Test Equipment >

IEC60947 Test Device for Checking Flexing of Clamping Screw Terminal to the Wires

Product Categories

IEC Test Equipment [85]
Medical Testing Equipment [17]
Ingress Protection Test Equipment [58]
Flammability Test Equipment [37]
Lithium Battery Testing Equipment [42]
LED Light Testing Equipment [18]
Test Finger Probe [54]
Environmental Test Chambers [14]
EV Battery Testing Equipment [19]
Test Gauges [10]

Dongguan Kingpo Technology Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

IEC60947 Test Device for Checking Flexing of Clamping Screw Terminal to the Wires

Name: IEC60947 Test Device for Checking Flexing of Clamping Screw Terminal to the Wires
Brand: KINGPO
Price: 1 USD

Buy cheap IEC60947 Test Device for Checking Flexing of Clamping Screw Terminal to the Wires product

Brand Name : KINGPO

MOQ : 1

Model Number : KP1446

Certification : calibration certificates

Place of Origin : Mainland China

Price : To be quoted

Payment Terms : T/T

Supply Ability : 5 sets per month

Delivery Time : 30 working days

Packaging Details : safety carton pack or plywood box.

Standard : IEC60947-1 clause 8.2.4.3

test sample : clamping screw terminal

Test rate : 10±2 RPM

Diameter of gyration : 75mm

Test height : 250~500mm

ferrule hole φ : 6.5~28.6mm

Contact Now

IEC60947 Test Device for Checking Flexing of Clamping Screw Terminal to the Wires

Product Introduction

This testing machine is also called the test apparatus for checking damage degree of wire which confirms to standards IEC60947-1 clause 8.2.4.3 ,figure 1 table 5. This compliance is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage to the wire. Besides, it is also used to check whether the clamping screw terminal can bear the stress during the process of normal usage.

The testing times can be preset before the test, and the compliance stops automatically with the alarm when the testing times are reached.

Technical Parameters

Model	KP1446
Test rate	10±2 RPM
Diameter of gyration	75mm
Test times	0～9999
Weights	0.2,0.3, 0.4, 0.7, 0.9, 1.4, 2, 2.9, 4.5, 5.9, 6.8, 8.6, 9.5, 10.4, 14, 15, 16.8, 20, 22.7kg (weights superimposed)
Test height	250~500mm
Diameter of ferrule hole	6.5~28.6mm, 12 pc
Standards	IEC60998-2-2,IEC60947-1

Notice:

(1)This device equipment with 18 wire bushes of 9 size, diameter: 6.5mm, 9.5mm, 13mm, 14.5 mm, 15.9mm, 19.1mm, 22.2mm, 25.4mm and 28.6mm.

(2)Rotate radius of turn table center hole is 38mm, user can select appropriate wire bush according to test requirements for test sample.

(3)If the bush hole not big enough, need to bundle the wire into the hole, can replace a bigger wire bush

(4)Height (H) deviation of ±15mm

Table 1: weights list

No.	Weight mass(kg)	Quantity
1#	0.2 with hook	1 pc
2#	0.3 with hook	1 pc
3#	0.4 with hook	1 pc
4#	0.7 with hook	1 pc
5#	0.7 through hole	2 pc
6#	0.9 with hook	1 pc
7#	0.9 through hole	2 pc
8#	1.4with hook	1 pc
9#	2 with hook	1 pc
10#	2 through hole	1 pc
11#	2.3 through hole	1pc
12#	4.5 with hook	1 pc
13#	4.5 through hole	1pc
14#	6.8 with hook	1 pc
15#	6.8 through hole	1 pc
16#	8 .2with hook	1 pc

Table 2: weights collocation table

Required mass (kg)	Collocation
0.2	1#
0.3	2#
0.4	3#
0.7	4#
0.9	6#
1.4	8#
2	9#
2.9	9#+7#
4.5	12#
5.9	12#2*5#
8.6	14#+2*7#
9.5	9#+13#+11#+5#
10.4	12#+13#+2*5#
14	14#+13#+10#+5#
15	16#+15#
16.8	16#+13#+11#+2*7#
20	16#+15#+11#+10#+5#
22.7	16#+15#+13#+11#+7#

IEC60947 Test Device for Checking Flexing of Clamping Screw Terminal to the Wires

IEC60947 Test Device for Checking Flexing of Clamping Screw Terminal to the Wires Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Dongguan Kingpo Technology Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!